Accessories


This number plate frame reversing camera uses a 1/4" Sharp CCD sensor and has 4 powerful infra red LEDs for night vision. The angle of the camera can be adjusted to get the best picture for your vehicle. It uses an aspheric lens to reduce the "fish eye" effect you get with wide angled lenses. It uses the same camera body as our CAM103 so the pictures we have it in use for that camera will apply to this one. It uses RCA (phono) connectors for the lead to the monitor. A short power cable is supplied, but the video cable needs to be bought separately.

£84.00 *
Delivery weight: 550 g

In stock
can be shipped within 1 days

Accessories

When fitting any electrical equipment to a vehicle it is wise to use a fuse on the positive wire. This lead has a 3 amp inline fuse and is suitable for hard wiring in monitors fitted with a 2.1/5.5mm power socket.

£3.00 *
Delivery weight: 30 g

In stock
can be shipped within 1 days

This is a simple 6m RCA cable for use with reversing cameras with RCA connectors. It is common to have a trigger wire on monitors that is attached to the reversing light. This turns the monitor on when reverse is selected. Usually this means running a separate cable back to the reversing light. On this RCA cable though we have had them made up with an additional red wire to save you the trouble of running this extra cable. It is also possible to utilise this cable to carry power back to the camera if you wish. A simple bit of soldering does the job, but remember all power wires should have a low amperage fuse as close to where you connect to the vehicle electrics as possible. We also made the cable slightly longer than the usual 5m ones as often they do not quite reach.

£4.00 *
Delivery weight: 100 g

In stock
can be shipped within 1 days

This is a simple 10m RCA cable for use with reversing cameras with RCA connectors. It is common to have a trigger wire on monitors that is attached to the reversing light. This turns the monitor on when reverse is selected. Usually this means running a separate cable back to the reversing light. On this RCA cable though we have had them made up with an additional red wire to save you the trouble of running this extra cable. It is also possible to utilise this cable to carry power back to the camera if you wish. A simple bit of soldering does the job, but remember all power wires should have a low amperage fuse as close to where you connect to the vehicle electrics as possible.

£7.20 *
Delivery weight: 150 g

In stock
can be shipped within 1 days

This is a simple 15m RCA cable for use with reversing cameras with RCA connectors. It is common to have a trigger wire on monitors that is attached to the reversing light. This turns the monitor on when reverse is selected. Usually this means running a separate cable back to the reversing light. On this RCA cable though we have had them made up with an additional red wire to save you the trouble of running this extra cable. It is also possible to utilise this cable to carry power back to the camera if you wish. A simple bit of soldering does the job, but remember all power wires should have a low amperage fuse as close to where you connect to the vehicle electrics as possible.

£9.60 *
Delivery weight: 200 g

In stock
can be shipped within 1 days