This reversing camera is identical to our CAM061 apart from we have had a special low diameter connector added to the camera cable. This was made after a request by a motorhome dealer who did not like drilling 17mm diameter holes for the standard connectors in brand new motorhomes. This hole drilled is just a fraction larger than the cable diameter making it easier to secure and waterproof. It matches all our systems with the 4 pin connectors and we can swap it by request.
The photograph above is a closer view of the connector used. This allows the 4 pin connector to be separated from the camera. An 8mm hole is then used to bring the cable through the motorhome wall. Once joined and taped it then is treated in the same way as our normal reversing cameras with the 4 pin connectors.
Camera angles quoted are a calculated measurement based on the focal length of the lens and size of sensor. They are given as a diagonal measurement. When a camera displays on a monitor there is a certain amount of cropping to get the picture to fit. To overcome these issues we have measured the horizontal camera angle with the camera image displayed on a 7" high resolution screen. The angle given may be subject to change between batches so if it is critical then please ask us to double check. When comparing with other web sites please remember the camera angles are often exagerated.
Our measured horizontal camera angle for this camera is 80 degrees.