Accessories


These are a high quality camera that give good colour definition and sharp picture. They use the Sharp CCD sensor which is widely considered the best on the market. Night vision with these cameras is far superior to the CMOS versions.

£60.00 *
Delivery weight: 380 g

Still in stock
can be shipped within 1 days

Accessories

This is a simple 6m RCA cable for use with reversing cameras with RCA connectors. It is common to have a trigger wire on monitors that is attached to the reversing light. This turns the monitor on when reverse is selected. Usually this means running a separate cable back to the reversing light. On this RCA cable though we have had them made up with an additional red wire to save you the trouble of running this extra cable. It is also possible to utilise this cable to carry power back to the camera if you wish. A simple bit of soldering does the job, but remember all power wires should have a low amperage fuse as close to where you connect to the vehicle electrics as possible. We also made the cable slightly longer than the usual 5m ones as often they do not quite reach.

£4.00 *
Delivery weight: 100 g

In stock
can be shipped within 1 days

This is a simple 10m RCA cable for use with reversing cameras with RCA connectors. It is common to have a trigger wire on monitors that is attached to the reversing light. This turns the monitor on when reverse is selected. Usually this means running a separate cable back to the reversing light. On this RCA cable though we have had them made up with an additional red wire to save you the trouble of running this extra cable. It is also possible to utilise this cable to carry power back to the camera if you wish. A simple bit of soldering does the job, but remember all power wires should have a low amperage fuse as close to where you connect to the vehicle electrics as possible.

£7.20 *
Delivery weight: 150 g

In stock
can be shipped within 1 days

This is a simple 15m RCA cable for use with reversing cameras with RCA connectors. It is common to have a trigger wire on monitors that is attached to the reversing light. This turns the monitor on when reverse is selected. Usually this means running a separate cable back to the reversing light. On this RCA cable though we have had them made up with an additional red wire to save you the trouble of running this extra cable. It is also possible to utilise this cable to carry power back to the camera if you wish. A simple bit of soldering does the job, but remember all power wires should have a low amperage fuse as close to where you connect to the vehicle electrics as possible.

£9.60 *
Delivery weight: 200 g

In stock
can be shipped within 1 days

This CCD reversing camera system matches a 7 inch colour rear view monitor with our standard CCD reversing camera. It uses RCA connections for the video which helps reduce the cost of the system. The RCA cables provided are our "easy wire" cables which have an extra wire to use to carry the trigger signal to the monitor from the reversing light. The system gives good day vision and gives excellent night vision performance.

From £124.61 *
Delivery weight: 1,600 g

In stock
can be shipped within 1 days

This system is made to our requirements. The camera uses an S4 stainless steel bracket and a 1/3" Sharp CCD sensor. It connects to the monitor using our "easy wire" video lead which saves running an extra cable for the reversing light trigger. The monitor is a good quality 7" colour clip on mirror which uses a LED back light for extra reliability. It uses a high resolution digital LCD panel which gives much better performance than standard monitors. The 800 x 480 pixels is over 3 times the amount of a standard monitor. It can be upgraded to an always on system by adding a power extension cable. It is available with a white or black bodied camera and a option of cable lengths from 6m to 20m.

From £105.41 *
Delivery weight: 1,900 g

In stock
can be shipped within 1 days