Print

M700 dual voltage 7 inch clip on mirror reversi...

M700 dual voltage 7 inch clip on mirror reversing camera systems

 

This is a collection of systems that use our latest dual voltage clip on mirror monitor. We have matched it will our main CCD cameras to give a good selection of cable lengths and camera type/colour. The systems are easy to wire in requiring only a power connection to the monitor. These systems use our 4 pin cables and locking waterproof connectors for reliability. Our bracket cameras use stainless steel bracket to inhibit corrosion. The monitor provides the cameras with power which helps protect the cameras from voltage fluctuations. It also means you can turn on the system from the monitor and use it as an always on rear view. If you are comparing this system with other web sites then they will invariably be using the inferior RCA connectors.

 

You can download the instruction manual using this link M700_series_Oct_2014.pdf

 


Display per page
Sort by

Dual voltage clip on mirror monitor and standard CCD reversing camera

These kits represent excellent value for money hence the name! The CCD reversing camera is the same as is included in some of our heavy duty CCD dual voltage kits and has been a reliably camera. The monitor can work off 12v or 24v automatically adjusting between the two. It has over voltage and reverse polarity protection which also gives protection to the cameras attached. Only the monitor needs connecting to the power as the camera (or cameras if you add a second) are powered directly from the monitor via the four core cable. With locking waterproof connectors this is a much superior system compared to those that use RCA style push in plugs. The simplicity in the wiring adds to the overall reliability.

From £145.98 *
In stock
can be shipped within 1 days
Delivery weight: 2,100 g

Twin lens CCD reversing camera and clip on mirror monitor

The clip on mirror monitor and twin lens camera make ideal partners. Cheaper systems use push together RCA plugs which makes wiring complicated and unreliable. This system uses our 4 pin connectors that screw together and lock. The camera takes its power direct from the monitor so you only need one set of connections to the vehicle electrics. The monitor also protects the cameras from over voltage and reverse polarity. This system is ideal for always on use as a rear view mirror. You may find slightly cheaper systems, but they will not have cameras with stainless steel brackets and will have the less reliable RCA style video connectors.

From £194.98 *
Still in stock
can be shipped within 1 days
Delivery weight: 2,500 g

CCD dome reversing camera and 7 inch clip on mirror colour monitor

This matches our CCD dome reversing camera with the 7 inch clip on mirror rear view monitor. The system is aimed at the motorhome market or van driver. The robust nature of the camera is useful in applications where it may be struck. It has good night vision.
From £145.98 *
In stock
can be shipped within 1 days
Delivery weight: 2,100 g

CCD Vancam reversing camera and 7 inch clip on mirror colour monitor (Cable Length: 20m, Camera colour: White)

The CCD VANCAM reversing camera is designed for use on vans where the rear doors go right to the very top of the van. Matched with our popular clip on mirror colour rear view monitor it gives a clear view behind when you are reversing. The system is very simple consisting of the camera, a cable and monitor. The cable length can be chosen between 5m to 20m. It carries both the power and video so the only connection that needs to be made to the vehicle electrics is the power to the monitor. The cable connectors are the waterproof locking type for reliability. There is a reversing light wire from the monitor that can be attached to automatically turn the system on when reverse is selected.

£164.98 *
In stock
can be shipped within 1 days
Delivery weight: 2,100 g

7 inch clip on mirror monitor and CCD bullet camera

This system uses 4 pin connectors throughout for reliability. It matches our CCD bullet reversing camera with a 7 inch colour TFT clip on mirror rear view monitor. The CCD sensor is made by Sony and it gives good day and night vision. It makes a good system for a motorhome, van or small lorry.

From £145.98 *
In stock
can be shipped within 1 days
Delivery weight: 2,100 g

Dual voltage clip on mirror monitor and mini CCD bracket camera

This system will appeal to people with vans or motorhomes where a smaller camera is more appropriate. The clip on mirror rear view monitor powers the CCD reversing camera so it can be turned on as required. It can also be wired in to come on automatically when reverse is selected. The reversing camera uses the Sony 1/3" sensor giving a high quality image during the day and very good night vision.

From £145.98 *
In stock
can be shipped within 1 days
Delivery weight: 2,000 g

Dual voltage clip on mirror monitor and two mini CCD bracket cameras

This system will appeal to people with vans or motorhomes where a smaller camera is more appropriate. The clip on mirror rear view monitor powers the CCD reversing camera so it can be turned on as required. It can also be wired in to come on automatically when reverse is selected. The reversing camera uses the Sony 1/3" sensor giving a high quality image during the day and very good night vision. This listing is for the two camera version.

From £205.98 *
In stock
can be shipped within 1 days
Delivery weight: 2,000 g

High resolution clip on mirror monitor and Mercedes Sprinter reversing camera

This matches our high resolution clip on mirror monitor with the high level brake light reversing camera for a Mercedes Sprinter or VW Crafter van. The monitor has a 800 x 480 pixel digital panel and is well matched to the 700 TVL Ultra CMOS sensor in the camera. The system uses locking four pin connectors for reliability and can be set to come on automatically with reverse or manually with the on off button.

From £194.98 *
In stock
Delivery weight: 2,100 g

High resolution clip on mirror monitor and Mercedes Sprinter CMOS reversing camera

This matches our high resolution clip on mirror monitor with the high level brake light reversing camera for a Mercedes Sprinter or VW Crafter van. The monitor has a 800 x 480 pixel digital panel and is matched to the modern CMOS sensor in the camera. The system uses locking four pin connectors for reliability and can be set to come on automatically with reverse or manually with the on off button.

From £157.98 *
Delivery weight: 2,100 g
*

Price incl. VAT, delivery extra