Print

7 inch stand on dash

7 inch stand on dash

We have a number of stand on dash monitors and they offer the choice between RCA connectors or the more reliable four pin ones. There is also a choice between the standard colour LCD panel or the more recent digital high resolution panel..

Display per page
Sort by

This is the latest version of the MON509 which has an 800x480 pixel digital colour panel and adjustable guidelines. It runs off 12v or 24v automatically adjusting between the two. It uses the locking 4 pin connectors that provide power back to the cameras simplifying the wiring needed to just a positive and negative supply off the ignition. It has two AV channels and can be wired in to automatically switch to AV2 on engaging reverse.

£96.00 *
Delivery weight: 1,200 g

In stock
can be shipped within 1 days

This 7" colour TFT rear view monitor uses a high definition colour LCD panel which offers almost 4 times more pixels than our standard 7" screens. It has 3 AV inputs, 2 of which have sound enabled. It has our standard 4 pin connectors for the cameras and will provide power for each camera attached. There are trigger wires with adjustable time delays on the inputs to enable indicators to be used to trigger an AV channel. It is dual voltage, being equally at home on 12 or 24v vehicles. It has voltage overload protection and reverse polarity protection to ensure the monitor and cameras are not damaged by fitting errors. It is mounted by a substantial U-bracket and to help keep the sun off the front of the monitor there is a deep sun shade. The controls are via a touch panel on the front of the monitor. At night there is a light sensor that will automatically dim the display to avoid glare.

 

£114.00 *
Delivery weight: 1.2 kg

In stock
can be shipped within 1 days

This is the same monitor that is used in our SYS333 systems and has proved its reliability over a number of years. It uses a LED backlight in the LCD panel which gives better colour and longer life than the cheaper CCLP backlights. The monitor comes with a stand and headrest frame. It has two AV inputs and can be connected to the reversing light to come on automatically when reverse is selected. We have combined this monitor with a number of our cameras in money off bundles.

£84.00 *
Delivery weight: 850 g

In stock
can be shipped within 1 days

We often get asked for a lower priced reliable monitor. This one offer a 7 inch colour TFT screen in a well made housing. It comes with a headrest frame and wiring loom that goes to two RCA connectors. It can be used with one or two cameras. If you want to use with one camera in an always on situation then it is best connected to AV1 channel. If you only want it to come on when reverse is selected then connect the camera to AV2 and the reversing light trigger wire to the positive feed to the reversing light.

£84.00 *
Delivery weight: 1,600 g

In stock
can be shipped within 1 days

We often get asked for a lower priced reliable monitor. This one offer a 7 inch colour TFT screen in a well made housing. It comes with a headrest frame and wiring loom that goes to two waterproof 4 pin connectors. It is a 12 or 24v monitor which can be used with one or two cameras. If you want to use with one camera in an always on situation then it is best connected to AV1 channel. If you only want it to come on when reverse is selected then connect the camera to AV2 and the reversing light trigger wire to the positive feed to the reversing light.

THIS PRODUCT IS NOW DISCONTINUED

£96.00 *
Delivery weight: 1,600 g

Currently out of stock, please email for estimated date it will be back in stock

This monitor is a newer version of the MON509. It has a number of improvements to increase reliability and improve its looks. It makes a cost effective monitor operating a higher resolution to standard monitors. It produces a 800 x 480 pixel image which is just over three times the resolution of standard 480 x 240 screens (often quoted as 1440 x 240 pixels or points). It has an improved integral sunshade, a cable clamp to secure the cable entry to the monitor, a metal connector to the main wiring loom and an external power board to reduce replacement costs (power boards often burn out if you have accidental cable damage - being external makes it much cheaper than replacing a monitor). The monitor can operate at 12 or 24v and provides power to the camera by locking 4 pin connectors.

£96.00 *
Delivery weight: 1,000 g

In stock
can be shipped within 1 days

*

Price incl. VAT, delivery extra